D25 Clicky Instruction Manual

Powerful ultra-compact single CR123A flashlight. Must have for flashlight lovers and collectors. Uses CREE XM-L2 T6 N.W. LED.

The unique beauty of Titanium
Titanium has the highest strength-to-weight ratio of any metal and superb corrosion resistance, making it ideal for the material choice for our limited edition pocket flashlights.

The D25 clicky Ti is machined from titanium rod with CNC and hand polished to mirror-like finish. Order your personal copy now from your EagleTac dealer before they are gone.

Best LED driver available
D25 clicky Ti series is the first to use the A400RC II driver and A950RC II driver. Both feature high efficiency, clicky and twist head operation, programmable 0.5 lumen moonlight mode, optional mode memory (D25C only), added auxiliary modes (i.e. disorientated strobe, fast SOS), and single li-ion compatibility.

Both limited Ti edition include a rigid holster w/retention device!

Features:

• CREE XM-L2 Neutral White LED
• Two group (1 & 2) outputs, selected by twisting bezel
• Three levels brightness and seven hidden modes (strobe, beacon, SOS, flash, etc) at group 1 (head loosen)
• Turbo output and tactical strobe output at group 2 (head tighten)
• Stainless steel bezel coated in durable titanium coating in dark grey color
• Smart clip design for forward or backward orientation clip position (D25A2/C2/LC2 clicky)
• Syntax ultra-clear glass lens w/ harden and both-size AR coating
• Titanium alloy built
• Low orange peel reflector for maximum output and a pleasing beam
• Gold and silver plated on all contacts (made with brass and copper)
• Superior tactical knurling and griping aerodynamic
• Heavy Duty Holster with self retention device
• Mil-Spec Paracord Lanyard w/ quick attachment clip

Output and Runtime:

• Battery: 1xCR123A battery
• Operating Voltage Range: 1.8V to 3V (also compatible with 3.7V RCR123A/16340 li-ion, see below for details)
• ◦Runs on RCR123A li-ion (direct drive). Using 4.2V li-ion direct drives the LED and yields maximum output at the expense of extensive heat generated from the LED. Limit each usage to less than five minutes (or less than one minute each with freshly charged li-ion for the first couple times). Active cooling (blowing cool air toward the light) or passive cooling (holding the light in your hand) helps preventing excessive heat built at the LED. Turn off the light to allow it to cool down if you find the flashlight too hot to hold. Do not leave the light running unintended with li-ion. Expect 500-750 LED lumen output from XM-L2 LED and 400-550 LED lumen from XP-G LED in direct driven mode.
• Output: LED Lumen: 397/260/29/1; OTF Lumen: 277/182/22/0.5
• Runtimes: (Turbo/high/med/low) 0.9/1.6/10/150+ hours

Dimensions:

• Length: 2.9 inch (7.5 cm)
• Body Diameter: 0.78 inch (2 cm)
• Head Diameter: 0.78 inch (2 cm)
• Body Weight (excluding batteries): 1 ounce (29 grams)

Operations:

• Basic - Press on the switch button until it clicks to turn on the flashlight. Press the switch again until it clicks to switch off the light.
• Access output groups 1 & 2 - Tight the head to access group 2 output. Loose the head to access group 1 output.
• Switch between output level - With the flashlight on, slightly press the switch and release (within 1s) to switch to the next output.
• Programmable Features - Moonlight output - dim or increase the entire output range of the group 1 output. Toggle this setting starting with head loosen, turn on the light, and then repeat tight and loose for three times.
  
  

Carrying method:

• Polished stainless steel pocket clip
• paracord lanyard with stainless steel split ring
• Rigid nylon holster w/ retention device and flip