G25C2 Instruction Manual

Features:

• CREE XM-L U2 LED in premium tint (limited supply only, free upgrade from T6)
• 2.7V-12.6V, takes 2xCR123A or 1x18650, (3-4 cells body extenders are also available)
• Crazy 770 LED lumen output, ANSI FL-1 640 lumen, from a turbo reflector
• Output (mode1): 770/320/59/2 lumen (ANSI FL-1 lumen: 640/267/49/2)
• Runtime (mode1): 1.1/3.5/20/200 hours
• Output (mode2): 770/90/strobe/disoriented strobe lumen (ANSI FL-1 lumen: 640/74)
• Runtime (mode2): 1.18/10 hours
• Beam Profile with CREE XML U2 LED
  • Center lux: 15,100 lux
  • Center spot angle: 6.9°
  • Spill light angle: 58°
  • Beam distance: 268 yards / 245 meters
• Lens
  • SCHOTT waterwhite glass lens w/ harden treatment
  • Anti-reflective (AR) coating on both sides
• Reflector: Very light orange peel aluminum reflector
• Rotary head design for instant access to four levels
• Low drop-out voltage and highly efficient current regulated C2100 EX circuit offers flat regulation when using all batteries, even with a single 18650 li-ion
• Programmable settings for 1) mode1 or mode2 output, 2) tailcap strobe access, 3) energy-saving feature
• Multiple spring loaded mechanism inside the flashlight body to prevent battery rattling when using CR123A batteries
• Dimensions
  • Head Dia.1.55 inches (39.5 mm)
  • Body Dia.1.0 inches (25 mm)
  • Length:5.9 inch (150 mm)
  • Weight:4.8 ounces (138 grams)
• Battery Type
  • 2xCR123A, 2xRCR123A, or 1x18650 li-ion2
  • 3xCR123A, or 3xRCR123A li-ion3
  • 4xCR123A, or 2x18650 li-ion4
  • 3x18650 li-ion5
  • Compatible battery diameter/length: 123A: (16-16.8mm/34-34.5mm); 18650: (18-18.8mm/67-68.5mm)
• Waterproof IPX-8 standard
• User replaceable glass lens
• Tactical rubber cigar grip (replaceable with grip cover)
• Battery reverse polarity protection
• User removable pocket clip
• Tail stand ability with included tail stand boot
• (kit only) 3 cells extender body tube for 3 CR123A/RCR123A, and 4 cells extender body tube for 4 CR123A or 2 18650
• (kit only) Add-on filter assembly made from solid aluminum, with flip-over filter door and lock. Comes with diffuser and YRGB output. The included holster fits G25C2 with bezel or filter assembly attached.

Opeartions:

• Tactical forward clicky switch
• Basic
  • Turn on the light by pressing the tailcap button until it clicks.
  • Dial the head to select between four pre-defined output levels.
  • You can pre-selected output level before turning on the light.
• Advanced
  • Cycle through auxiliary modes: Tighten the head (1st level), and loosen to 3rd (or 4th level) and then tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.
    
    
  • Switching between mode1 and mode2 (mode1 by default): Dial to 2nd output level and turn the flashlight on and off for 20 times.
  • Tail strobe feature (off by default): With this enabled, you can access strobe output at the tailcap switch button . To enable (or disable) this function (disable from factory), dial to 1th level and turn the flashlight on and off 20 times (one second or less between each click). With the tailcap strobe setting enabled, a double press of the switch button (within one second) will activate the strobe output.
  • Energy saving feature (on by default): G25C2 reduces output by 20% after 200 seconds at turbo mode. To toggle this feature, dial the head to 4th level and turn the flashlight on and off for 20 times. Once setting has been changed, LED will output 3 seconds at 100% (enable), or 1 second at 100% (disable).

Standard version includes:

• EagleTac G25C2 flashlight
• Black titanium coated stainless steel bezel (removable)
• Spare O-rings
• GITD switch boot
• Black titanium coated Stainless steel pocket clip
• User manual
• Tail-stand rubber boot
• Soft cigar holding grip
• Cigar grip cover ring
• Lanyard ring attachment ring
• Heavy Duty Nylon Holster w/ self-retention device and flip
• Mil-Spec Paracord Lanyard w/ quick attachment clip
• Two ET CR123A batteries included

Kit version includes:

• Durable aluminum flip-over filter assembly
• Diffused, yellow, red, blue, and green optical grade anti-reflective coated add-on lens.
• 3 cells extension body tube for three CR123A/RCR123A
• 4 cells extension body tube for four CR123A or two 18650 li-ion