P20A2 MKII User Manual

The updated P20A2 MKII version has siginificant performance improvements over the original model. It offers an incredible 340 lumens with 244 ANSI lumens. P20A2 Mark II offers a new UI (user interface) that is perfect for profesionals and the general public.

Features:

• Upgraded C1500 (C2 XPG), C2100 (C2 XML) and A900 (A2) circuit with turbo boost output technology for more output
• New rear switch mechanism and tail boot
• Detachable stainless steel clip with durable titanium coating secured by a clip ring
• Revised user interface (refer to operations below)
• Three levels output, activate by twisting bezel
• Three hidden modes (strobe, beacon, SOS), activated by twisting bezel
• Optional tactical strobe mode (disabled from factory). When enabled, operate by pressing rear switch twice – This feature is not available on the P20C2 MKII XM-L now
• Stainless steel bezel
• Syntax ultra-clear glass lens w/ harden and AR coating
• Type III finish / aerospace tough aluminum
• Low orange peel reflector for maximum output and a pleasing beam
• Gold and silver plated on all contacts
• Superior tactical knurling and griping aerodynamic
• Protrude tactical clicky tail-cap with momentary on/off function
• Heavy Duty Holster
• ET21 Diffuser glass filter with Syntax tough and AR coating
• Tail-standing rubber piece
• Mil-Spec Paracord Lanyard w/ quick attachment clip UP-L1

Specifications:

• Dimensions: Length: 6.3 inch (16.1cm), Body Diameter: 0.8 inch (2.1cm), Head Diameter: 1 inch (26cm)
• Body Weight (excluding batteries): 3.2 ounces (91grams)
• Two AA batteries
• Operating Voltage Range: 0.8V to 3.4V

Runtimes and output:

• Low/General/Turbo: 100+/8/1.5 hours
• LED Lumen: 12/85/278(340)
• ANSI FL-1: 9/63/205(244)

Beam profile: Both XP-G and XM-L P20 models offer preciously machined aluminum reflector coated in light orange peel finish for smooth and highly efficient output beam. XP-G gives a tighter and brighter center spot, while XM-L gives out more light overall and has a bigger center spot.

Operations:

• Fully presses the rear switch for constant on (you can pre-select output with head tighten for turbo output and with head loosen for general output). Slightly press the rear switch for momentary on/off.
• To reach low and hidden strobe mode, loosen the head and follow by tightening and loosening the head to reach the low output mode. Repeat the action to cycle through the strobe-slow blink-S.O.S. modes.
• Turbo boost function: P20 series turns on at maximum output power at turbo boost output mode. The turbo boost output lasts for three minutes and reduces its regulated output by 20% (30% for P20C2 XML) to prolong runtime.

Kit Options:

• Base Model: Stainless Steel Bezel, Diffuser Filter , Spare O-rings, GITD Switch Boot, Black Stainless Steel Pocket Clip, Heavy Duty Nylon Holster w/ Flip, Mil-Spec Para cord Lanyard w/ quick attachment clip, User Manual
• RGB Kit: Includes everything in base model, plus: Red Filter, Blue Filter and Green Filter