P20C2 MKII User Manual

The original P20C2 series has been one of the best selling EagleTac models. The updated MKII Cree XM-L2 U2 version has siginificant performance improvements. It offers an incredible 850 lumens with 622 ANSI lumens. P20C2 Mark II offers a new UI (user interface) that is perfect for profesionals and the general public.

Features:

• Upgraded C1500 (C2 XPG), C2100 (C2 XML) and A900 (A2) circuit with turbo boost output technology for more output
• New rear switch mechanism and tail boot
• Detachable stainless steel clip with durable titanium coating secured by a clip ring
• Revised user interface (refer to operations below)
• Three levels output, activate by twisting bezel
• Three hidden modes (strobe, beacon, SOS), activated by twisting bezel
• Optional tactical strobe mode (disabled from factory). When enabled, operate by pressing rear switch twice – This feature is not available on the P20C2 MKII XM-L2 U2 now
• Stainless steel bezel
• Syntax ultra-clear glass lens w/ harden and AR coating
• Type III finish / aerospace tough aluminum
• Low orange peel reflector for maximum output and a pleasing beam
• Gold and silver plated on all contacts
• Superior tactical knurling and griping aerodynamic
• Protrude tactical clicky tail-cap with momentary on/off function
• Heavy Duty Holster
• ET21 Diffuser glass filter with Syntax tough and AR coating
• Tail-standing rubber piece
• Mil-Spec Paracord Lanyard w/ quick attachment clip UP-L1

Specifications:

• Dimensions: Length: 5.1 inch (13cm), Body Diameter: 0.8 inch (2.1cm), Head Diameter: 1 inch (26cm)
• Body Weight (excluding batteries):2.8 ounces (79grams)
• Two CR123A lithium batteries (button-top cells only)
• Operating Voltage Range: 2.7V to 9V (button-top cells only)

Runtimes and output:

• LED Lumen: 850-636/126/10
• ANSI FL-1 lumen: 622-470/101/8
• Runtime: 1.2/10/100+

Beam profile:

• Center lux: 6400
• Center spot angle: 11.4°
• Spill light angle: 59°
• Beam distance: 175 yards / 160 meters

Operations:

• Tactical forward clicky switch
• Basic
  • Turn on the light by pressing the tailcap button until it clicks.
  • Tight the head to enable the Turbo output mode, loose the head for general output mode.
  • You can pre-selected output level before turning on the light.
• Advanced
  • Starting with the head loosen, tight and loose the head within 1 second to enable hidden modes. Repeat to cycle through all hidden auxiliary modes.
  • Turn on and off the flashlight for 20 times (each click must be within one second) to toggle tailcap strobe settings. When this feature enabled, a double press of the switch will activate strobe mode.

Kit Options:

• Base Model: Stainless Steel Bezel, Diffuser Filter , Spare O-rings, GITD Switch Boot, Black Stainless Steel Pocket Clip, Heavy Duty Nylon Holster w/ Flip, Mil-Spec Para cord Lanyard w/ quick attachment clip, User Manual
• RGB Kit: Includes everything in base model, plus: Red Filter, Blue Filter and Green Filter